优质、高产转基因抗虫棉杂交种苏杂668的选育与栽培技术

本文概述了苏杂668的选育过程，阐明了苏杂668的特征特性、产量水平、纤维品质和抗性表现，并提出其高产栽培技术措施。     

Effect of proline-spirooxindole on viability and apoptosis of non-small-cell lung cancer A549 cells

AIM:To investigate the effect of proline-spirooxindole on the viability and apoptosis of human non-small-cell lung cancer A549 cells. METHODS:The effect of proline-spirooxindole on the viability of A549 cells was determined by CCK-8 assay. The apoptosis was analyzed by flow cytometry. The effects of proline-spirooxindole on the expression of PARP and p53 and the phosphorylation of mTOR were determined by Western blot. RESULTS:After A549 cells were treated with proline-spirooxindole (25, 50 and 100 mg/L), the cell viability was decreased (P<0.01) compared with DMSO control group. The apoptotic rate was increased compared with DMSO control group (P<0.01). The protein expression of p53 was up-regulated, the increased apoptotic protein cleaved PARP was observed, and the phosphorylation of mTOR was inhibited (P<0.01). CONCLUSION:Proline-spirooxindole inhibits the viability of A549 cells and induces apoptosis, which may be related to the phosphorylation of mTOR.     

不同光质下外源锌对水培生菜生长和品质的影响

以'意大利耐抽薹'生菜(Lactuca sativa L.)为试材,采用水培法,设置不同光质(红蓝光比例为4∶1、1∶2和全红光、全蓝光)和外源锌浓度(0、0.5、1.0 mg·L-1 ZnSO4·7H2O),研究不同光质下外源锌对水培生菜生长和品质特性的调控效应,以期为植物工厂在不同光质下施加外源锌提高蔬菜产量和品质提供参考依据.结果 表明:高比例红光会促进生菜生物量、可溶性糖和还原糖的积累,并降低硝酸盐的含量,其中以红蓝光比例为4∶1的光质处理效果最好;高比例蓝光会促进光合色素和可溶性蛋白质含量的增加,其中以全蓝光处理效果最好,但全蓝光处理会对植株的生长产生抑制作用.从光质与Zn的互作效果看,光质对生菜生长和品质的影响起主导作用,外源Zn起调节作用.综合考虑,红蓝光比例为4∶1光质下根施0.5 mg·L-1 ZnSO4·7H2O处理对生菜的生长发育、产量提高以及品质改善的促进作用最佳.     

大花君子兰叶绿体基因组及其特征

采用Illumina MiSeq测序平台对大花君子兰（Clivia miniata）叶片总DNA进行测序，通过组装获得了其叶绿体基因组（cpDNA）全长序列（158 114 bp）。对其cpDNA注释得到135个基因，包含87个蛋白编码基因、40个tRNA基因和8个rRNA基因。采用生物信息学方法对获得的cpDNA进行简单序列重复（SSR）分析和密码子偏好性分析。结果显示：①大花君子兰cpDNA中共有61个SSR位点，其中单核苷酸、二核苷酸、三核苷酸、四核苷酸、五核苷酸和六核苷酸重复数分别为38、9、2、8、3和1个，多数SSR分布在基因间隔区；②大花君子兰cpDNA密码子偏爱以A或U（T）结尾，亮氨酸使用频率最高，半胱氨酸使用频率最低。基于24种植物的cpDNA全长和23种植物的叶绿体ycf2基因序列进行系统发育分析，结果显示大花君子兰与石蒜科植物在同一分支，显示最近的亲缘关系，支持大花君子兰属于石蒜科。基于叶绿体ycf2的系统发育分析结果与基于cpDNA全长的系统发育分析研究结果大部分相同，支持ycf2基因可以代替cpDNA全长用于植物系统发育分析。     

纵条纹炭角菌的研究进展

纵条纹炭角菌具有镇静、催眠等药用价值,已实现工厂化、规模化栽培。为探究纵条纹炭角菌的研究进展,对其分类学地位、生物学特性、人工培养、化学成分和生理活性等方面的文献进行综述,并提出未来研究的方向和应用前景。     

生物炭对酸化茶园土壤性状和真菌群落结构的影响

为探讨生物炭长期施用对酸化茶园土壤改良和真菌群落结构的影响,分析了按生物炭用量0、2.5、5、10、20、40 t·hm^-2施用5年后的茶园土壤性状和真菌群落结构变化。结果表明,施用生物炭5年后的茶园土壤pH提高了0.16~1.11,可溶性有机碳含量提高了52.6%~92.3%,而铵态氮和硝态氮含量以10 t·hm^-2处理最高。施用生物炭5年后的土壤性质变化,进一步影响了真菌群落结构,表现为Chao指数、ACE指数和Shannon指数随生物炭用量增加呈先增加后降低的趋势;提高生物炭施用量对茶园土壤次要作用的真菌（LDA值<3.50）丰度的增加效果高于优势真菌（LDA值>3.50）的效果,其中被孢霉属、木霉属、毛壳菌属的相对丰度增加,黑盘孢属的相对丰度降低。     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

Innovating in less developed regions: What drives patenting in the lagging regions of Europe and North America

Not all economically disadvantaged—“less developed” or “lagging”—regions are the same. They are, however, often bundled together for the purposes of innovation policy design and implementation. This paper attempts to determine whether such bundling is warranted by conducting a regional level investigation for Canada, the United States, on the one hand, and Europe, on the other, to (a) identify the structural and socioeconomic factors that drive patenting in the less developed regions of North America and Europe, respectively; and (b) explore how these factors differ between the two contexts. The empirical analysis, estimated using a mixed‐model approach, reveals that, while there are similarities between the drivers of innovation in North America's and Europe's lagging regions, a number of important differences between the two continents prevail. The analysis also indicates that the territorial processes of innovation in North America's and Europe's less developed regions are more similar to those of their more developed counterparts than to one another.     

Backshoring and nearshoring: An overview

Increasingly, economies that have traditionally benefited from offshoring are losing some of their strategical advantages, with a consequent increase in backshoring by developed economies. This paper describes the phenomenon and tries to shed light on the current challenges, trends, and debates in the area, and on the main determinants of backshoring. A new phenomenon known as nearshoring is also analysed—this consists of relocating some previously offshored manufacturing activities so that they are now close to previous core locations, but not so close as to suffer from disagglomeration effects. This combines the advantages of offshoring and backshoring.